Submersible Pumps

Rotary Wellpoint Pumps

Axial Flow Pumps

High Pressure Pumps

Suction Pumps
featuring


Trash / Materials
Sludge Pumps

- PT 4 TMS
High Flow Trash Pumps
- PT 3 D
- PT 6 TPA
- PT 8 TPA
- PT 8 TPC
- PT 10 TPC
- PT 14 TPB
- PT 18 TPD
Super Silent Pumps


Tanks & Filters

Size 8" Trash Pump
Model PT8TPA - 1104.44T

Volute: Fine gray cast iron
Impeller: Enclosed - 2 vane. Handles 3" diameter solids
Priming System: Automatic dry priming and repriming system that features a 50 cfm water tolerant, diaphragm vacuum pump driven by the main drive shaft. Our major competitors use a 15 cfm compressor pump with a small compressor venturi that can easily clog. The air/water separator is a simple, reliable float that opens and closes a rubber plunger as water rises and falls. A non return valve isolates the pump during priming and protects against back flow
Wear Rings: Replaceable. (Double wear rings available)
Seal: Cornell's patented Cycloseal® design with Run-Dry oil lubrication system. John Crane T-2 single mechanical seal with Viton® elastomers, stainless steel hardware and tungsten- vs. silicon carbide seal faces for abrasion resistance
Check Valve: Holland Pump Design
Shaft Sleeve: Heat treated 416 stainless steel
Bearings: Heavy duty, grease lubricated, deep groove ball bearings, with a minimum of 50,000 hours bearing life
Hardware: Stainless steel float linkage. A positive seating vacuum priming valve prevents water carry-over to the vacuum, pump or atmosphere
Vacuum Pump: 50 SCFM Maximum
Performance: Primes to depths of 25 feet below the center line of the pump in 1 minute
Flanges: 8" suction, 6" discharge

PT8TPA @ 2000 RPM
and 10' Lift
Capacity of Pump in U.S. Gallons per Minute (gpm) @ continuous Performance
135' Head
Shutoff Head
100' Head
1500
50' Head
2600

Model: Perkins 1100 Series 1104C-44
Type: 4 Cylinder, 4 Stroke
Liquid Cooled Diesel Engine
Displacement: 4.4 L (268 cu.in.)
Governor: Mechanical
Lubrication: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 8.5 U.S. quarts
Coolant Capacity: 5 U.S. gal
Fuel Tank: Integral 114 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum
Starter: 12 Volt
Standard Features: Skid, SAE 3 Flywheel Housing, SAE 10” Clutch, Safety Shutdown System Covering: Engine Oil Pressure
Optional Features: Auto-Oiler with Engine Oil Shutdown, Site or DOT Highway Trailer, Auto-Start, HANS (Holland Automatic Notification System), Full Instrument Package
Coupling: SAE 3 Bell housing adapter, Stromag coupling
Perkins Published Performance: Power: 62 BHP Continuous @ 1800 RPM

Specifications subject to change without notice

Approximate Dimensions
Powered by Perkins 1004.42 Diesel Engine Turbo Charged
Skid Base
DOT Trailer
Net Weight (lbs)
3410
4010
Shipping Weight (lbs)
3560
N/A
Export Crate Size (cu.ft)
245
N/A

 

 

 

 

 

 

 

 

 

 

 

© Holland Pump - 2004