|
Model PT6TPA - 804.33T
|
Volute: Fine gray cast iron
Impeller: Enclosed - 2 vane. Handles 3" diameter solids
Priming System: Automatic dry priming and repriming system that features a 50 cfm water tolerant, diaphragm vacuum pump driven by the main drive shaft. Our major competitors use a 15 cfm compressor pump with a small compressor venturi that can easily clog. The air/water separator is a simple, reliable float that opens and closes a rubber plunger as water rises and falls. A non return valve isolates the pump during priming and protects against back flow
Wear Rings: Replaceable. (Double wear rings available)
Seal: Cornell's patented Cycloseal® design with Run-Dry oil lubrication system. John Crane T-2 single mechanical seal with Viton® elastomers, stainless steel hardware and tungsten- vs. silicon carbide seal faces for abrasion resistance
Check Valve: Holland Pump Design
Shaft Sleeve: Heat treated 416 stainless steel
Bearings: Heavy duty, grease lubricated, deep groove ball bearings, with a minimum of 50,000 hours bearing life
Hardware: Stainless steel float linkage. A positive seating vacuum priming valve prevents water carry-over to the vacuum, pump or atmosphere
Vacuum Pump: 50 SCFM Maximum
Performance: Primes to depths of 25 feet below the center line of the pump in 1 minute
Flanges: 6" suction, 4" discharge
|
PT6TPA @ 1900 RPM
and 10' Lift |
Capacity of Pump in U.S. Gallons per Minute
(gpm) @ continuous Performance |
140' Head |
Shutoff |
100' Head |
1100 |
50' Head |
1300 |
Model: Perkins 800 Series 804C-33
Type: 4 Cylinder, 4 Stroke, Tier 2,
Liquid Cooled Diesel Engine
Displacement: 3.3 L (201 cu.in.)
Governor: Mechanical
Lubrication: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 10.6 U.S. quarts (10L)
Coolant Capacity: 2.5 U.S. gal (5L)
Fuel Tank: Integral 114 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum
Starter: 12 Volt
Standard Features: Skid, SAE 4 Flywheel Housing, SAE 8” Clutch, Safety Shutdown System Covering; Engine Oil Pressure
Optional Features: Auto-Oiler with Engine Oil Shutdown, Site or Highway Trailer, Auto-Start, HANS (Holland Automatic Notification System), Full Instrument Package
Coupling: SAE 4 Bell housing adapter, Dodge coupling
Perkins Published Performance: Power: 50 BHP Continuous @ 2000 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by Kubota D905 Diesel Engine |
Skid Base |
DOT Trailer |
| Net Weight (lbs) |
2600 |
2900 |
| Shipping Weight (lbs) |
2700 |
N/A |
| Export Crate Size (cu.ft) |
119 |
N/A |
|
| |
 |
Size
6" Trash Pump
