|
Model PT4TMS-404.22
|
Type/Model: Solids and slurry handling, lower head pump/ Cornell 4NNDH
 Volute: Fine gray cast iron, 6” suction, 4” discharge Impeller: 2 Vane open Delta® impeller diameter 10.09", fine gray iron. Handles 3” compressible, spherical solids
Priming System: Automatic dry priming and repriming system that features a 50 cfm water tolerant, diaphragm vacuum pump driven by the main drive shaft. Our major competitors use a 15 cfm compressor pump with a small compressor venturi that can easily clog. The air/water separator is a simple, reliable stainless steel float that opens and closes a rubber plunger as water rises and falls. A non return valve isolates the pump during priming and protects against back flow
Check Valve: Holland Pump Design
Seal: Cornell patented Cycloseal® design with Run-Dry oil lubrication system. Single mechanical seal with Viton® Elastmers, stainless steel hardware and tungsten versus silicon-carbide seal faces for abrasion
Shaft Sleeve: Heat treated 416 stainless steel
Bearings: Heavy duty, grease lubricated, deep groove ball bearings, with a minimum of 50,000 hours bearing life
Hardware: Stainless steel float linkage. A positive seating vacuum priming valve prevents water carry-over to the vacuum, pump or atmosphere
Vacuum Pump: 50 SCFM Maximum |
PT4TMS @ 1800 RPM
and 15' Lift |
Capacity of Pump in U.S. Gallons per Minute
(gpm) @ continuous Performance |
120' Head |
Maxhead |
90' Head |
550 |
50' Head |
620 |
Model: Perkins 404D22
Type: Tier 3, 4 Cylinder, 4 Stroke, Naturally Aspirated,
Liquid Cooled Diesel Engine
Displacement: 2.2 L (134 cu.in.)
Governor: Mechanical
Lubrication: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 7.6 L (2 U.S. gal)
Coolant Capacity: 9.4 L (2.5 U.S. gal)
Fuel Tank: Integral 114 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum
Starter: 12 Volt, 2 kW
Standard Features: Skid, SAE 4 Flywheel Housing, SAE 7-1/2” Flywheel, Murphy Safety Shutdown System Covering: Engine Oil Pressure, High Water Temperature
Optional Features: Auto-Oiler with Engine Oil Shutdown, Auto-Start, HANS (Holland Automatic Notification System), Site or DOT Highway Trailer, Full Instrument Package
Coupling: SAE 4 Bell housing adapter, Stromag coupling
Perkins Published Performance: Power: 35 BHP Continuous @ 2000 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by Perkins 404.22 Diesel Engine |
Skid Base |
DOT Trailer |
| Net Weight (lbs) |
3110 |
3510 |
| Shipping Weight (lbs) |
3300 |
N/A |
| Export Crate Size (cu.ft) |
130 |
N/A |
|
 |
 |
Size
4" Trash, Materials, Sludge Pump
