|
Model H8TP
- 4045D
|
Size: 8" Trash Pump
Volute: Fabricated Steel (optional stainless steel
and special abrasion resistant steel volutes are available) Impeller: Semi-open,
3 Vane. Handles 4" diameter compressible spherical solids. (optional
stainless steel or special abrasion resistant steel impellers are available)
Impeller Shaft: Stainless steel
Seal: Rotary Mechanical,
oil-lubricated, carbon & ceramic (optional tungsten carbide or
silicon carbide seals are avilable option)
Hydraulic System
Hydraulic Reservoir level: 50 gallon capacity with
twin 10 micron spin on oil filter
Biodegradable Oil: Furnished standard (optional petrolium
based hydraulic oil available)
Hydraulic Pump: Denison vane type positive
displacement pump with
pilot operated Denison relief valve
Hydraulic Motor: Vickers vane type positive displacement motor
Heat
Exchanger: Double row, SCH 40 pipe with integral intake basket (optional
engine
mounted
oil cooler available)
Hydraulic Hose: 50' set of SAE 100R2, two wire braid high-pressure
hose
Pump Head Pressure Relief System: Available as option to protect system
against improper connection or interruption of hydraulic oil flow from pump head
to power unit
Optional Equipment
Site or Highway trailer, automatic oiler system to add engine makeup oil
as required with low oil shutdown, Holland Automatic Notification System (HANS),
automatic remote start and stop controller
|
8TP @ 2000
PSI |
Capacity of Pump in U.S. Gallons per Minute
(gpm) for continuous Performance |
20' Head |
2450 |
10' Head |
2700 |
Model: John Deere 4045D
Type: Tier 3, 4 Cylinder, 4 Stroke, Naturally Aspirated,
Liquid Cooled Diesel Engine
Displacement: 4.23L (258 cu.in.)
Governor: Mechanical
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 8.5 U.S. Quarts
Coolant Capacity: 5 U.S. Gallons
Fuel Tank: Integral 114 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI Starter: 12
Volt, 2.0 kW
Standard Features: SAE 3 Flywheel Housing, SAE 10" Clutch, SAE
B Pump Adaptor, Murphy Safety Shut Down System
Covering: Engine Temperature,
Engine Oil Pressure, Hydraulic Oil Level & Hydraulic Oil Temperature
John Deere Published Performance: Maximum Continuous
Power: 70 BHP (53kW) @ 2000 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by Perkins 1104.44 Diesel Engine |
Skid Base |
DOT
Trailer
|
Pump |
| Net Weight (lbs) |
2568 |
2968
|
528 |
| Shipping Weight (lbs) |
N/A |
N/A
|
N/A |
| Export Crate Size (cu.ft) |
198 |
N/A
|
19 |
| Optional
Single Axle Trailer Shown |
|
 |
 |
