|
Model H6TP
- 404.22
|
Size: 6" Trash Pump
Volute: Fabricated Steel (optional stainless steel and special abrasion
resistant steel volutes are available)
Impeller: Semi-open, 3 Vane. Handles 3" diameter
compressible spherical solids (optional stainless steel or special
abrasion resistant steel impellers
are available)
Impeller Shaft: Stainless steel
Seal: Rotary Mechanical, oil-lubricated, carbon & ceramic (tungsten
carbide or silicon carbide seals are available as an option)
Hydraulic System
Hydraulic Reservoir level: 30 gallon capacity with 10 micron spin-on oil filter.
Automatic shutdowns for over-temperature or low oil
Biodegradable Oil: Furnished standard (optional petrolium based hydraulic oil
available)
Hydraulic Pump: Denison vane type positive displacement pump with pilot operated
Denison relief valve
Hydraulic Motor: Vickers vane type positive displacement motor
Heat Exchanger:Double row, SCH 40 pipe with integral intake basket (optional engine mounted
oil cooler available)
Hydraulic Hose: 50' set of SAE 100R2, two wire braid high-pressure
hose
Pump Head Fail Safe Pressure Relief System: Available as an option to protect
system against improper connection or interruption of biodegradable oil flow
from pump head to power unit
Optional Equipment
Site or DOT highway trailer, automatic oiler system to add engine makeup oil
as required with low oil shutdown, Holland Automatic Notification System (HANS),
automatic remote start and stop controller
|
6TP @ 2000
PSI |
Capacity of Pump in U.S. Gallons per Minute
(gpm) for continuous Performance |
20' Head |
1000 |
10' Head |
1330 |
Model: Perkins, 100 Series, 404D22
Type: Tier 3, 4 Cylinder, 4 Stroke, Naturally Aspirated, Liquid Cooled Diesel
Engine
Displacement: 2.2L (134cu.in.)
Governor: Mechanical
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element Lube Oil capacity:
2 U.S. Gallons
Coolant Capacity: 2.5 U.S. Gallons
Fuel Tank: Integral 68 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI Starter: 12
Volt, 2.0 kW
Standard Features: SAE 4 Flywheel Housing, SAE 7-1/2" Flywheel,
SAE B Pump Adaptor, Murphy Safety Shut Down System
Covering: Engine
Temperature, Engine Oil Pressure, Hydraulic Oil Level & Hydraulic
Oil Temperature
Perkins Published Performance: Maximum Continuous
Power: 38 BHP (28.5kW) @ 2000 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by Perkins 404D22 Diesel Engine |
Skid Base |
DOT
Trailer
|
Pump |
| Net Weight (lbs) |
2202 |
2502
|
335 |
| Shipping Weight (lbs) |
2302 |
N/A
|
N/A |
| Export Crate Size (cu.ft) |
107 |
N/A
|
10 |
| Optional
Single Axle Trailer Shown |
|
 |
 |
