|
Model H6TMS
- 1104.44
|
Size: 6" Trash, Materials, Sludge Pump
Volute: Fabricated Steel (optional stainless steel and special abrasion
resistant steel volutes are available)
Impeller: Recessed vortex, 6 Vane. Handles 3.5" diameter
compressible spherical solids. (optional stainless steel or special
abrasion resistant steel
impellers are available)
Impeller Shaft: Stainless steel
Seal: Rotary Mechanical, oil-lubricated, carbon & ceramic
(optional tungsten carbide or silicon carbide seals are available option)
Hydraulic System
Hydraulic Reservoir level: 50 gallon capacity with twin 10 micron spin on oil
filter
Biodegradable Oil: Furnished standard (optional petroleum based
hydraulic oil
available)
Hydraulic Pump: Denison vane type positive displacement pump
with pilot operated
Denison relief valve
Hydraulic Motor: Vickers vane type positive displacement motor
Heat
Exchanger: Double row, SCH 40 pipe with integral intake basket (optional
engine mounted oil cooler available)
Hydraulic Hose: 50' set of SAE 100R2, two
wire braid high-pressure
hose
Pump Head Fail Safe Pressure Relief System: Available as option to protect
system against improper connection or interruption of biodegradable oil flow
from pump head to power unit
Optional Equipment
Site or DOT highway trailer, automatic oiler system to add engine makeup oil
as required with low oil shutdown, Holland Automatic Notification System (HANS),
automatic remote start and stop controller
|
6TMS @ 2000
PSI |
Capacity of Pump in U.S. Gallons per Minute
(gpm) for continuous Performance |
20' Head |
1200 |
10' Head |
1400 |
Model: Perkins 1000 Series 1104.44
Type: 4 Cylinder, 4 Stroke, Naturally Aspirated,
Liquid Cooled Diesel Engine
Displacement: 4.2L (256 cu.in.)
Governor: Mechanical
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 8.5 U.S. Quarts
Coolant Capacity: 5 U.S. Gallons
Fuel Tank: Integral 114 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI Starter: 12
Volt, 2.0 kW
Standard Features: SAE 3 Flywheel Housing, SAE 10" Clutch,
SAE B Pump Adaptor, Murphy Safety Shut Down System
Covering: Engine
Temperature,
Engine Oil Pressure, Hydraulic Oil Level & Hydraulic Oil Temperature
Perkins Published Performance: Maximum Continuous
Power: 70 BHP @ 2000 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by Perkins 1104.44 Diesel Engine |
Skid Base |
DOT
Trailer
|
Pump |
| Net Weight (lbs) |
2568 |
2968
|
195 |
| Shipping Weight (lbs) |
N/A |
N/A
|
N/A |
| Export Crate Size (cu.ft) |
198 |
N/A
|
16 |
| Optional
Single Axle Trailer Shown |
|
 |
 |
