|
Model H4TP
- 404.22
|
Size: 4" Trash Pump
Volute: Aluminum - converts to side or top discharge
in minutes (optional stainless steel and special abrasion resistant
steel volutes are available)
Impeller: Semi-open, 3 Vane. Handles 3" diameter
spherical compressible solids, fits in 22” manhole (optional
stainless steel and special abrasion resistant steel impellers are
available)
Impeller Shaft: Stainless steel
Seal: Rotary Mechanical, oil-lubricated, carbon & ceramic (optional
tungsten carbide and silicon carbide seals are available)
Hydraulic System
Hydraulic Reservoir Level: 30 gallon capacity with single 10
micron spin-on oil filter
Biodegradable Oil: Furnished standard (optional petroleum base
hydraulic oil available)
Hydraulic Pump: Denison vane type positive displacement pump
with pilot operated Denison relief valve
Hydraulic Motor: Vickers vane type positive
displacement motor
Heat Exchanger: Double row, SCH 40 pipe with integral intake basket (optional
engine mounted oil cooler available)
Hydraulic Hose: 50' set of SAE 100R2, two wire braid high-pressure
hose
Pump Head Fail Safe Pressure Relief System: Available as an
option to protect system against
improper connection or interruption of biodegradable oil flow from pump head
to
power unit
Optional Equipment
Site or DOT highway trailer, automatic oiler system to add engine makeup oil
as required with
low oil shutdown, Holland Automatic Notification System (HANS), automatic remote
start and stop controller
|
4TP @ 2000
PSI |
Capacity of Pump in U.S. Gallons per Minute
(gpm) for continuous Performance |
20' Head |
700 |
10' Head |
800 |
Model: Perkins, 100 Series, 404C-22
Type: 4 Cylinder, 4 Stroke, Naturally Aspirated, Liquid
Cooled, Diesel Engine
Displacement: 2.2L (134cu.in.)
Governor: Mechanical
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element Lube Oil Capacity:
2 U.S. Gallons
Coolant Capacity: 2.5 U.S. Gallons
Fuel Tank: Integral 68 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI Starter: 12
Volt, 2.0 kW
Standard Features: SAE 4 Flywheel Housing, SAE 7-1/2" Flywheel,
SAE B Pump Adaptor; Murphy Safety Shut Down System
Covering: Engine
Temperature, Engine Oil Pressure & Hydraulic Oil Level, Hydraulic
Oil Temperature
Perkins Published Performance: Maximum Continuous
Power: 38 BHP (28.5kW) @ 2000 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by Perkins 404.22 Diesel Engine |
Skid Base |
DOT
Trailer
|
Pump |
| Net Weight (lbs) |
2202 |
2502
|
170 |
| Shipping Weight (lbs) |
2302 |
N/A
|
N/A |
| Export Crate Size (cu.ft) |
107 |
N/A
|
6 |
| Optional
Single Axle Trailer Shown |
|
 |
 |
