|
Model H4TMS
- 404.22
|
Size: 4" Trash, Materials, Sludge Pump
Volute: Fabricated Steel (optional stainless steel
and special abrasion resistant
steel volutes are available)
Impeller: Recessed vortex, 6 Vane. Handles 3" diameter compressible
spherical solids. (optional stainless steel or special abrasion resistant steel
impellers
are available)
Impeller Shaft: Stainless steel
Seal: Rotary Mechanical, oil-lubricated, carbon & ceramic (optional tungsten
carbide or silicon carbide seals are available option)
Hydraulic System
Hydraulic Reservoir level: 30 gallon capacity with single 10
micron spin on oil filter
Biodegradable Oil: Furnished standard (optional petrolium based hydraulic oil
available)
Hydraulic Pump: Denison van type positive displacement pump with pilot operated
Denison relief valve
Hydraulic Motor: Vickers vane type positive displacement motor
Heat Exchanger:Double row, Sch 40 pipe with integral intake
basket (optional engine mounted oil cooler available)
Hydraulic Hose: 50' set
of SAE
100R2, two wire braid high-pressure hose
Pump Head Fail Safe Pressure Relief System: Available as option to protect system
against improper connection or interruption of biodegradable oil flow from pump
head to power unit
Optional Equipment
Automatic oiler system to add engine makeup oil as required,
automatic remote start and stop controller, site or DOT highway trailer, Holland
Automatic Notification System (HANS)
|
4TMS @ 2000
PSI |
Capacity of Pump in U.S. Gallons per Minute
(gpm) for continuous Performance |
20' Head |
450 |
10' Head |
550 |
Model: Perkins, 100 Series, 404C-22
Type: 4 Cylinder, 4 Stroke, Naturally Aspirated,
Liquid Cooled Diesel Engine
Displacement: 2.2 L (134cu.in.)
Governor: Mechanical
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element Oil Reservoir: 2 U.S.
Gallons
Fuel Tank: Integral 68 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI
Starter: 12 Volt, 2.0 kW
Standard Features: SAE 4 Flywheel Housing, SAE 7-1/2 Flywheel, SAE
B Pump Adaptor, Murphy Safety Shut Down System
Covering: Engine Temperature, Engine Oil Pressure,
Hydraulic Oil Level, Hydraulic Oil Temperature & Engine Oil Level
in "Auto-Oiler" Reservoir.
Perkins Published Performance: Maximum Continous BHP 38 BHP (28.5kW)
@ 2000 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by Perkins 404.22 Diesel Engine |
Skid Base |
DOT
Trailer
|
Pump |
| Net Weight (lbs) |
2202 |
2502
|
180 |
| Shipping Weight (lbs) |
2302 |
N/A
|
N/A |
| Export Crate Size (cu.ft) |
107 |
N/A
|
13 |
| Optional
Single Axle Trailer Shown |
|
 |
 |
