|
Model H12TP
- 6068HF225
|
Size: 12" Trash Pump
Volute: Fabricated Steel (optional stainless steel and special abrasion
resistant steel volutes are available)
Impeller: Semi-open, 3 Vane. Handles 4.5" diameter compressible
spherical solids. (optional stainless steel or special abrasion resistant
steel impellers are available)
Impeller Shaft: Stainless steel
Seal: Rotary Mechanical, oil-lubricated, carbon & ceramic (optional
tungsten carbide or silicon carbide seals are avilable option)
Hydraulic System
Hydraulic Reservoir level: 50 gallon capacity with twin 10 micron
spin on oil filter
Biodegradable Oil: Furnished standard (optional petrolium based
hydraulic oil available)
Hydraulic Pump: Denison vane type positive displacement
pump with
pilot operated Denison relief valve
Hydraulic Motor: Vickers vane type positive displacement motor
Heat
Exchanger: Double row, SCH 40 pipe with integral intake basket (optional
engine
mounted
oil cooler available)
Hydraulic Hose: 50' set of SAE 100R2, two wire braid high-pressure
hose
Pump Head Fail Safe Pressure Relief System: Available as option to protect
system against improper connection or interruption of hydraulic oil flow from
pump head to power unit
Optional Equipment
Site or Highway trailer, automatic oiler system to add engine makeup oil
as required with low oil shutdown, Holland Automatic Notification System (HANS),
automatic remote start and stop controller
|
12TP @ 2000
PSI |
Capacity of Pump in U.S. Gallons per Minute
(gpm) for continuous Performance |
20' Head |
4200 |
10' Head |
4500 |
Model: John Deere 6068HF225
Type: Tier 3, 6 Cylinder, 4 Stroke, Turbocharged, Liquid Cooled, Diesel Engine
Displacement: 6.8L (414 cu.in.)
Governor: Mechanical
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 5 U.S. Gallons
Coolant Capacity: 5 U.S. Gallons
Fuel Tank: Integral 240 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI Starter: 12
Volt
Standard Features: SAE 4 Flywheel Housing, SAE 11-1/2" Flywheel,
SAE C Pump Adaptor, Murphy Safety Shut Down System
Covering: Engine
Temperature, Engine Oil Pressure, Hydraulic Oil Level & Hydraulic
Oil Temperature
John Deere Published Performance: Maximum Continuous Power: 140 BHP
(105kW) @ 2200 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by John Deere 6068 Engine |
Skid Base |
DOT
Trailer
|
Pump |
| Net Weight (lbs) |
4060 |
4660
|
690 |
| Shipping Weight (lbs) |
4160 |
4760
|
740 |
| Export Crate Size (cu.ft) |
350 |
N/A
|
28 |
| Tandem Axle
Trailer Shown |
|
 |
 |
