Submersible Pumps

Rotary Wellpoint Pumps

Axial Flow Pumps

High Pressure Pumps

Suction Pumps
featuring


Trash / Materials
Sludge Pumps
- PT 4 TMS
High Flow Trash Pumps
- PT 3 D
- PT 6 TPA
- PT 8 TPA
- PT 8 TPC
- PT 10 TPC
- PT 14 TPB
- PT 18 TPD
Super Silent Pumps

Tanks & Filters
Suction Pumps featuring


SUCTION PUMP MODEL
3"
4"
6"
8"
Maximum Spherical Solid
Trash / Materials / Sludge
3"
4"
2.75"
High Flow
1.14"
1.75"
2.17"
High Head / Abrasives
1.19"
1.5"
2.38"
Maximum Flow
Trash / Materials / Sludge
750 @ 60'
1400 @ 50'
2200 @ 25'
High Flow
628 @ 15'
1672 @ 35'
2640 @ 35'
High Head / Abrasives
968 @ 200'
2112 @ 240'
4148 @ 220'
Maximum Head
Trash / Materials / Sludge
85'
88'
68'
High Flow
75'
130'
120'
High Head / Abrasives
265'
312'
279'
 
NATIONAL HEADQUARTERS:
2610 Sidney Lanier Drive, Brunswick, Georgia 31525
Toll Free: 888.997.PUMP • Local: (912) 466-0304 • Fax: (912) 466-0086
E-mail: sales@hollandpump.com
SALES & RENTAL SERVICES
Ft. Myers, Florida (800) 761-7867 • (941) 267-4100
Hollywood, Florida (954) 966-6611
Jacksonville, Florida (800) 451-0140 • (904) 880-0010
Orlando, Florida (800) 451-5346 • (407) 855-7109
Norfolk, Virginia (888) 837-PUMP • 757-858-9900
Pensacola, Florida (850) 437-3300
Tampa, FLorida (888) 395-6322 • (813) 626-0599
Walterboro, South Carolina (643) 538-2214
Holland Suction Pumps featuring our unique priming system include a 50 cfm diaphragm vacuum pump. Our major competitors use a 15cfm compressor pump. The result is gives you the following advantages
  • Early Prime - Our pump reprimes from a snore early while the water in the ditch is only a few inches deep vs. many inches deep for their system. That because has 3x the priming power. In fact, has enough priming power for wellpointing
  • Forgiving Prime - a small leak on the suction side will not keep our pump from priming. If you have spent hours trying to get theirs to prime you need
  • Reliable Prime - Our system is simple with few parts. As a result it's reliable, easy to maintain and repair. Compare this to theirs
  • EcoPrime - No oil from the compressor or pump overflow to contaminate the job site
  • ProvenPrime - thousands have proven themselves in worldwide use everyday for many years

Run Dry - Our oil immersed mechanical seal permits indefinite dry running

FinishFaster! That's the result of having reliable priming and steady no breakdown pumping. And Finishing your job Faster will save you big money on fuel, equipment and crew.
  • Auto Start and Stop
  • Automatic engine oiler
  • TwinPrime for 100 cfm capacity. Great for wellpointing
  • Hans Pumps Monitoring System
  • Stainless Steel impeller
  • Road or site trailer
  • Super silenced version to 62db @ 23 ft.
  • High head pumps from 4"-8". Delivery head to 328 feet. Flows to 4180 gpm
  • Trash/Materials/Sludge pumps - our 4"-8" vortex pumps will pass most anything without clogging including sludges, flurries, bentonite, raw sewerage, rags and stringy materials, and 3" to 4" spherical solids

 

 

 

 

 

 

 

 

 

 

 
© Holland Pump - 2004