Submersible Pumps

Rotary Wellpoint Pumps

- W6R
- W6R Super Silent
- W8R
- W8R Super Silent
- W12R
- W12R Super Silent
- Electric W12R

Axial Flow Pumps

High Pressure Pumps

Suction Pumps
featuring


Tanks & Filters
Rotary Wellpoint Pumps
Holland 12" Rotary Wellpoint is simple, compact, fuel-efficient, easy to service with proven dependability for more than 50 years.

  • Rotary lobe positive displacement pumps are excellent for handling air and do not separating air from water. As a result, these pumps are simple and reliable. Centrifugal Suction pumps typically require prime assistance systems such as 15 cfm compressor with much less air handling capability or water separation systems that are more prone to spillage and failure
  • Our Rotary lobe pumps have steady discharge flow vs. centrifugals which surge, lowering output
  • Centrifugal suction pumps require up to 62% more horsepower than our rotary lobe pumps, resulting in higher fuel costs


  • If used regularly, standard rotary lobe pumps require an expensive, time-consuming factory rotor and seal replacement every 6-12 months plus a spare pump to use during the factory rebuild. Our rotors and mechanical seals can be field changed in 2 hours (for 8") and 4 hours (for 12")
  • Non helix design lobes require up to 62% more horsepower than our efficient pump. This results in higher fuel costs for end users
  • Our helix design rotary lobe pumps are 100% made in the USA vs made in Germany with long lead times
  • Our integral fuel tank has sufficient capacity for uninterrupted weekend use vs 24 tanks that require daily man hours or a separately rented nurse tank for fuel>
  • Our pump can discharge against head whereas traditional lobe pumps cannot
  • Our pump end is guaranteed for 1 year*

*MANUFACTURER'S WARRANTY IS A 100% STANDARD WARRANTY COVERING PARTS AND LABOR, INCLUDING WEAR FOR A PERIOD OF 12 MONTHS. DAMAGE CAUSED BY HARD SOLIDS OR BY OVERHEAT IS NOT COVERED.


  At Full Speed Under Load  

ROTARY WELLPOINT MODEL
PUMP SIZE
FUEL CAPACITY (Gallons)
DBA's @ 23 FEET
FUEL USED (gph)
MAX GPM*
STANDARD ENGINE
6"
100
85
0.45
500
Perkins 403D11
6"
72
57
.45
500
Perkins 403D11
8"
72
76
0.8
1300
Perkins 404D22
8"
72
67
0.8
1300
Perkins 404D22
12"
114
82
1.6
2600
John Deere 4045D
12"
114
67
1.6
2600
John Deere 4045D
12"
n/a
68
n/a
2600
Hostile Duty 60 hp 460/3
* ASSUMES SPECIFIC GRAVITY OF 1 (FRESH WATER) WITH FLOODED SUCTION @ 62 DEGREES F AND LOW DISCHARGE PRESSURE
NATIONAL HEADQUARTERS:
2610 Sidney Lanier Drive, Brunswick, Georgia 31525
Toll Free: 888.997.PUMP • Local: (912) 466-0304 • Fax: (912) 466-0086
E-mail: sales@hollandpump.com
SALES & RENTAL SERVICES
West Palm Beach, Florida (800)451-0769 •(561)697-3333
Orlando, Florida (800) 451-5346 • (407) 855-7109
Ft. Myers, Florida (800) 761-7867 • (941) 267-4100
Jacksonville, Florida (800) 451-0140 • (904) 880-0010
Tampa, Florida (888) 395-6322 • (813) 626-0599
Pensacola, Florida (850) 437-3300
Walterboro, South Carolina (643) 538-2214

 

 

 

 

 

 

 

 

 

 

 
© Holland Pump - 2010