Hydraulically Driven Submersible Pumps
Standard Features:
- Water cooled diesel engine
- Automatic engine shutdowns
- Automatic shutdowns
- Highway trailer with 60 hour fuel tank and adjustable leveling legs
- Lifting frame
- Accessible spin on hydraulic filters
- Hoses with quick couplings
- 12 Volt battery
- Biodegradable vegetable oil
Optional Features:
- Automatic engine oiler
- Oil cooler
- Electric motor
Benefits:
- SELF PRIMING: No priming required so you don't have to worry about weekend & midnight shutdowns caused by lost prime due to vacuum leaks or mechanical failure of priming system
- RUN DRY CAPABILITIES: Can run dry indefinitely; suction lift pumps will suffer extensive damage if run dry which may result from a loss of prime or the pump can cycle excessively causing excessive wear to priming system components
- VERTICAL LIFT: HDS pumps are the best choice for applications where a suction lift pump would require more than 15' of lift
- SAFE, CONVENIENT SET-UP AND FUELING: Power unit can be safely & conveniently located up to 100 yards from the pump for fueling and high and dry with less danger of "washing-in"
- SOLID HANDLING CAPABILITY: Our submersible pumps will pass up to 4" solids
- MORE TOLERANT OF IMPELLER WEAR: Performance of submersible pump impellers less problematic that self priming suction pumps which rely on close fitting parts for good suction
|
GPM@2000 PSI |
|||||
| Pump Power | Standard Engine | Inlet Size | Max Solid | Max Head | 50' Head | 10' Head |
| H2MS-D2 | Honda GXH50 | 2" | 1/4" | 65' | 30 | 87 |
| H4TMS-D6 | Perkins 404D22 | 4" | 3" | 115' | 280 | 550 |
| H4TP-D6 | Perkins 404D22 | 4" | 3" | 140' | 550 | 840 |
| H6TP-D6 | Perkins 404D22 | 6" | 3" | 68' | 340 | 1330 |
| H6TMS-D8 | John Deere 4045TF280 | 6" | 3.5" | 130' | 730 | 1300 |
| H6MS-D8 | John Deere 4045TF280 | 6" | 4" | 105' | 820 | 1600 |
| H8TP-D8 | John Deere 4045TF280 | 8" | 4" | 100' | 1500 | 2750 |
| H6MS-D12 | John Deere 6068T | 6" | 4" | 160' | 1370 | 2000 |
| H8TPC-D10 | John Deere 4045TF280 | 8" | 3" | 200' | 3800 | 4200 |
| H12TP-D12 | Deere 6068HF225 | 12" | 4.5" | 85' | 2300 | 4700 |
| H14TP-D14 | John Deere 6068HF485 | 14" | 3.5" | 85' | 2500 | 6500 |
Axial & Mixed Flow Pumps
Hydraulically Driven Axial Flow Pumps
Standard Features:
- Special Hydraulic Motor provides bearing lubrication
- Cast steel bearing tube, oil bath lube for pump bearings
- 316 stainless steel pump shaft, longer pump life
- Two sets of tapered roller bearings, handles thrust loads
- Replaceable stainless steel wear rings, easy rebuild
- Cast bronze propeller, uniform performance. Cast stainless steel optional
- Lifting eye, easily setup or moved
- Self-cleaning inlet screen, keeps out debris
- Spin on hydraulic connections, fast setup
- Replaceable stainless steel wear ring
- Cast bronze propeller (cast stainless steel optional) uniform performance
- Lifting eye easily setup or moved
- Self-cleaning inlet screen keeps out debris
- Spin on hydraulic connections fast setup
- Motor induction bell means no wasted horsepower
- Water cooled diesel engine
- Automatic engine shutdowns
- Automatic hydraulic shutdowns
Optional Features:
- Auto-start and stop
- Automatic engine oiler
- Biodegradable vegetable oil
- Hydraulic oil cooler
- Electric motor
Benefits:
- Eliminates priming problems which means you don't have to worry about weekend and midnight shutdowns caused by lost prime
- Can run dry indefinitely. Some Suction Lift pumps will suffer extensive damage if run dry which may result from a loss of prime or a dry hole
- Power unit can be safely and conveniently located up to 100 yards from the pump. Suction pumps must be staged in close proximity to the work
- Low cost per gallon transferred compared to suction pumps
| Holland Model | Power Unit | Max Head | Max Flow GPM @ 10' Lift | Skid Option | Trailer Option | Canopy Option |
| A14000-D12 | D12-6068HF285 | 26'+ TDH | 14000 | * | * | * |
| A22000-D20 | D20-6068HF285 | 26'+ TDH | 22000 | * | * | * |
| A26000-D24 | D24-6068HF485 | 26'+ TDH | 26000 | * | * | * |
| A36000-D30 | D30-6068HF485 | 26'+ TDH | 36000 | * | * | |
| A48000-D36 | D36-6090HF485 | 26'+ TDH | 48000 | * | * | |
| A55000-D42 | D42-6135HF485 | 26'+ TDH | 55000 | * | * |
| APPLICATIONS FOR CLEAR WATER | |
|
|
