|
Model A22000
- 6068HF485
|
Volute: Fabricated Steel (optional stainless steel and special abrasion
resistant steel volutes are available)
Propeller: 19-1/2" cast nibral (cooper alloy
UNS #C95800) for clean water. Handles 1/4" compressible, spherical
solids. Replaceable wear ring
Bearing Carrier: Stainless Steel
Prop Shaft: Stainless Steel
Seal: Rotary Mechanical, oil-lubricated, carbon & ceramic
(optional tungsten carbide or silicon carbide seals are available option)
Hydraulic System
Hydraulic Reservoir Level: 80 gallon capacity with
twin 10 micron spin on oil filter
Biodegradable Oil: Furnished standard (optional petroleum
based hydraulic oil available)
Hydraulic Pump: Denison vane type positive displacement
pump with pilot operated Denison relief valve
Hydraulic Motor: Vickers vane type positive displacement motor in suction bell
Heat Exchanger: Double row, SCH 40 pipe with integral
intake basket (optional engine mounted oil cooler available)
Hydraulic Hose: 50' set of SAE 100R2, two wire
braid high-pressure hose
Pump Head Pressure Relief System: Available as option
to protect system against improper connection or interruption of hydraulic
oil flow from pump head to power unit
Optional Equipment
Site or DOT highway trailer, automatic oiler system to add engine makeup
oil as required with low oil shutdown, Holland Notification System
(HANS), automatic remote start and stop controller
|
Model: John Deere 6068HF485
Type: Tier 3, 6 Cylinder, 4 Stroke, Turbocharged, Liquid Cooled, Diesel Engine
Displacement: 6.8L
Governor: Mechanical
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 5 U.S. Gallons
Coolant Capacity: 5 U.S. Gallons
Fuel Tank: Integral 448 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI Starter: 12
Volt
Standard Features: SAE 4 Flywheel Housing, SAE 11-1/2" Flywheel,
SAE C Pump Adaptor, Murphy Safety Shut Down System
Covering: Engine
Temperature, Engine Oil Pressure, Hydraulic Oil Level & Hydraulic
Oil Temperature
John Deere Published Performance: Maximum Continuous Power: 250 BHP
@ 2200 RPM
Specifications subject to change without notice
|
Approximate
Dimensions
Powered by John Deere 6081T Diesel Engine |
Skid Base |
DOT Trailer |
Pump
|
| Net Weight (lbs) |
5400 |
6100 |
1421
|
| Shipping Weight (lbs) |
N/A |
N/A |
N/A
|
| Export Crate Size (cu.ft) |
460 |
N/A |
91
|
| Tandem
Axle Trailer Shown |
|
 |
 |
